压风制氮校准

Modules/OpcData/Http/Controllers/Api/zaoquan/ZQDcsAirAndNitrogenController.php

@@ -154,38 +154,38 @@ class ZQDcsAirAndNitrogenController  extends BaseController
         $info = [
             [
                 "label"=>"1#压风机",
-                "state"=> $baseData['2009411999081473_2'] ?? 0,
+                "state"=> ($baseData['2009411999081473_2'] ?? 0),
                 "text"=>($baseData['2009411999081473_2'] ?? 0) > 0 ? "启动" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "出口压力",
-                            "value"=> $baseData['2009411929797633_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929797633_1'] ?? 0) / 100,1))." Mpa",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009411930215425_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411930215425_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009411930299393_1'] ?? 0,
+                            "value"=> ($baseData['2009411930299393_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009411930438657_1'] ?? 0,
+                            "value"=> ($baseData['2009411930438657_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "电机电流",
-                            "value"=> $baseData['2009411930420225_1'] ?? 0,
+                            "value"=> ($baseData['2009411930420225_1'] ?? 0)." A",
                         ],
                         [
                             "label"=> "油气桶压力",
-                            "value"=> $baseData['2009411929713665_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929713665_1'] ?? 0) / 100, 1))." Mpa",
                         ],
                         [
                             "label"=> "油气桶温度",
-                            "value"=> $baseData['2009411930110977_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411930110977_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行状态",
@@ -204,38 +204,38 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"2#压风机",
-                "state"=> $baseData['2009411999095809_2'] ?? 0,
+                "state"=> ($baseData['2009411999095809_2'] ?? 0),
                 "text"=>($baseData['2009411999095809_2'] ?? 0) > 0 ? "启动" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "出口压力",
-                            "value"=> $baseData['2009411930143745_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411930143745_1'] ?? 0) / 100,1))." Mpa",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009411929541633_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929541633_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009411929818113_1'] ?? 0,
+                            "value"=> ($baseData['2009411929818113_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009411930373121_1'] ?? 0,
+                            "value"=> ($baseData['2009411930373121_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "电机电流",
-                            "value"=> $baseData['2009411929777153_1'] ?? 0,
+                            "value"=> ($baseData['2009411929777153_1'] ?? 0)." A",
                         ],
                         [
                             "label"=> "油气桶压力",
-                            "value"=> $baseData['2009411929570305_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929570305_1'] ?? 0) / 100, 1))." Mpa",
                         ],
                         [
                             "label"=> "油气桶温度",
-                            "value"=> $baseData['2009411929521153_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929521153_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行状态",
@@ -254,38 +254,38 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"3#压风机",
-                "state"=> $baseData['2009411999108097_2'] ?? 0,
+                "state"=> ($baseData['2009411999108097_2'] ?? 0),
                 "text"=>($baseData['2009411999108097_2'] ?? 0) > 0 ? "启动" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "出口压力",
-                            "value"=> $baseData['2009411930143745_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411930143745_1'] ?? 0) / 100,1))." Mpa",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009411930051585_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411930051585_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009411930203137_1'] ?? 0,
+                            "value"=> ($baseData['2009411930203137_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009411930074113_1'] ?? 0,
+                            "value"=> ($baseData['2009411930074113_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "电机电流",
-                            "value"=> $baseData['2009411930240001_1'] ?? 0,
+                            "value"=> ($baseData['2009411930240001_1'] ?? 0)." A",
                         ],
                         [
                             "label"=> "油气桶压力",
-                            "value"=> $baseData['2009411929584641_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929584641_1'] ?? 0) / 100, 1))." Mpa",
                         ],
                         [
                             "label"=> "油气桶温度",
-                            "value"=> $baseData['2009411930190849_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411930190849_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行状态",
@@ -304,38 +304,38 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"4#压风机",
-                "state"=> $baseData['2009411999120385_2'] ?? 0,
+                "state"=> ($baseData['2009411999120385_2'] ?? 0),
                 "text"=>($baseData['2009411999120385_2'] ?? 0) > 0 ? "启动" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "出口压力",
-                            "value"=> $baseData['2009411930143745_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411930143745_1'] ?? 0) / 100,1))." Mpa",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009411930457089_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411930457089_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009411929736193_1'] ?? 0,
+                            "value"=> ($baseData['2009411929736193_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009411929998337_1'] ?? 0,
+                            "value"=> ($baseData['2009411929998337_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "电机电流",
-                            "value"=> $baseData['2009411929695233_1'] ?? 0,
+                            "value"=> ($baseData['2009411929695233_1'] ?? 0)." A",
                         ],
                         [
                             "label"=> "油气桶压力",
-                            "value"=> $baseData['2009411929969665_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929969665_1'] ?? 0) / 100, 1))." Mpa",
                         ],
                         [
                             "label"=> "油气桶温度",
-                            "value"=> $baseData['2009411929869313_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929869313_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行状态",
@@ -354,38 +354,38 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"5#压风机",
-                "state"=> $baseData['2009411999130625_2'] ?? 0,
+                "state"=> ($baseData['2009411999130625_2'] ?? 0),
                 "text"=>($baseData['2009411999130625_2'] ?? 0) > 0 ? "启动" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "出口压力",
-                            "value"=> $baseData['2009411929072641_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929072641_1'] ?? 0) / 100,1))." Mpa",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009411930285057_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411930285057_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009411930340353_1'] ?? 0,
+                            "value"=> ($baseData['2009411930340353_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009411929926657_1'] ?? 0,
+                            "value"=> ($baseData['2009411929926657_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "电机电流",
-                            "value"=> $baseData['2009411929472001_1'] ?? 0,
+                            "value"=> ($baseData['2009411929472001_1'] ?? 0)." A",
                         ],
                         [
                             "label"=> "油气桶压力",
-                            "value"=> $baseData['2009411929154561_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929154561_1'] ?? 0) / 100,1))." Mpa",
                         ],
                         [
                             "label"=> "油气桶温度",
-                            "value"=> $baseData['2009411930225665_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411930225665_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行状态",
@@ -404,38 +404,38 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"6#压风机",
-                "state"=> $baseData['2009411999140865_2'] ?? 0,
+                "state"=> ($baseData['2009411999140865_2'] ?? 0),
                 "text"=>($baseData['2009411999140865_2'] ?? 0) > 0 ? "启动" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "出口压力",
-                            "value"=> $baseData['2009411929758721_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929758721_1'] ?? 0) / 100,1))." Mpa",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009411929906177_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929906177_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009411930401793_1'] ?? 0,
+                            "value"=> ($baseData['2009411930401793_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009411930387457_1'] ?? 0,
+                            "value"=> ($baseData['2009411930387457_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "电机电流",
-                            "value"=> $baseData['2009411929291777_1'] ?? 0,
+                            "value"=> ($baseData['2009411929291777_1'] ?? 0)." A",
                         ],
                         [
                             "label"=> "油气桶压力",
-                            "value"=> $baseData['2009411929558017_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929558017_1'] ?? 0) / 100,1))." Mpa",
                         ],
                         [
                             "label"=> "油气桶温度",
-                            "value"=> $baseData['2009411930031105_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411930031105_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行状态",
@@ -454,38 +454,38 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"7#压风机",
-                "state"=> $baseData['2009411999155201_2'] ?? 0,
+                "state"=> ($baseData['2009411999155201_2'] ?? 0),
                 "text"=>($baseData['2009411999155201_2'] ?? 0) > 0 ? "启动" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "出口压力",
-                            "value"=> $baseData['2009411929758721_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929758721_1'] ?? 0) / 100,1))." Mpa",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009411929906177_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929906177_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009411930401793_1'] ?? 0,
+                            "value"=> ($baseData['2009411930401793_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009411930387457_1'] ?? 0,
+                            "value"=> ($baseData['2009411930387457_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "电机电流",
-                            "value"=> $baseData['2009411929291777_1'] ?? 0,
+                            "value"=> ($baseData['2009411929291777_1'] ?? 0)." A",
                         ],
                         [
                             "label"=> "油气桶压力",
-                            "value"=> $baseData['2009411929558017_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411929558017_1'] ?? 0) / 100,1))." Mpa",
                         ],
                         [
                             "label"=> "油气桶温度",
-                            "value"=> $baseData['2009411930031105_1'] ?? 0,
+                            "value"=> (round(($baseData['2009411930031105_1'] ?? 0) / 10, 1))." ℃",
                         ],
                         [
                             "label"=> "运行状态",
@@ -504,26 +504,26 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"1#制氮机",
-                "state"=> $baseData['2009411999183873_2'] ?? 0,
+                "state"=> ($baseData['2009411999183873_2'] ?? 0),
                 "text"=>($baseData['2009411999183873_2'] ?? 0) > 0 ? "启动" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "氮气浓度",
-                            "value"=> $baseData['2009412000312321_1'] ?? 0,
+                            "value"=> ($baseData['2009412000312321_1'] ?? 0)." %",
                         ],
                         [
                             "label"=> "输出流量",
-                            "value"=> $baseData['2009412000277505_1'] ?? 0,
+                            "value"=> ($baseData['2009412000277505_1'] ?? 0)." m³/H",
                         ],
                         [
                             "label"=> "冷干温度",
-                            "value"=> $baseData['2009412000324609_1'] ?? 0,
+                            "value"=> ($baseData['2009412000324609_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "累计流量",
-                            "value"=> $baseData['2009412000039937_1'] ?? 0,
+                            "value"=> ($baseData['2009412000039937_1'] ?? 0)." m³/H",
                         ],
                         [
                             "label"=> "制氮机运行状态",
@@ -546,26 +546,26 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"2#制氮机",
-                "state"=> $baseData['2009411999222785_2'] ?? 0,
+                "state"=> ($baseData['2009411999222785_2'] ?? 0),
                 "text"=>($baseData['2009411999222785_2'] ?? 0) > 0 ? "启动" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "氮气浓度",
-                            "value"=> $baseData['2009412000506881_1'] ?? 0,
+                            "value"=> ($baseData['2009412000506881_1'] ?? 0)." %",
                         ],
                         [
                             "label"=> "输出流量",
-                            "value"=> $baseData['2009412000478209_1'] ?? 0,
+                            "value"=> ($baseData['2009412000478209_1'] ?? 0)." m³/H",
                         ],
                         [
                             "label"=> "冷干温度",
-                            "value"=> $baseData['2009412000525313_1'] ?? 0,
+                            "value"=> ($baseData['2009412000525313_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "累计流量",
-                            "value"=> $baseData['2009412000058369_1'] ?? 0,
+                            "value"=> ($baseData['2009412000058369_1'] ?? 0)." m³/H",
                         ],
                         [
                             "label"=> "制氮机运行状态",
@@ -674,8 +674,10 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             "2009212285375489_1", // 12采区_5号压风机停机故障
             "2009212285209601_1", // 12采区_5号压风机加载时间小时*100位
             "2009212285221889_1", // 12采区_5号压风机加载时间小时*10位
+            "2009212285236225_1", // 12采区_5号压风机加载时间小时*1位
             "2009212285142017_1", // 12采区_5号压风机运行时间小时*100位
             "2009212285162497_1", // 12采区_5号压风机运行时间小时*10位
+            "2009212285180929_1", // 12采区_5号压风机运行时间小时*1位
 
             "2009212285289473_1", // 12采区_6号压风机排气压力
             "2009212285301761_1", // 12采区_6号压风机排气温度
@@ -702,8 +704,10 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             "2009212285787137_1", // 12采区_6号压风机变频系统状态
             "2009212285516801_1", // 12采区_6号压风机加载时间小时*100位
             "2009212285529089_1", // 12采区_6号压风机加载时间小时*10位
+            "2009212285543425_1", // 12采区_6号压风机加载时间小时*1位
             "2009212285449217_1", // 12采区_6号压风机运行时间小时*100位
             "2009212285463553_1", // 12采区_6号压风机运行时间小时*10位
+            "2009212285477889_1", // 12采区_6号压风机运行时间小时*1位
 
 
             "2009218787843073_1", // 12采区_1号制氮机吸附塔A压力值
@@ -740,46 +744,46 @@ class ZQDcsAirAndNitrogenController  extends BaseController
         $info = [
             [
                 "label"=>"1#压风机",
-                "state"=> $baseData['2009212283225089_2'] ?? 0,
-                "text"=>($baseData['2009212283225089_2'] ?? 0) > 0 ? "启动" : "停止",
+                "state"=> ($baseData['2009212283225089_2'] ?? 0),
+                "text"=>($baseData['2009212283225089_2'] ?? 0) > 0 ? "运行" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "排气压力",
-                            "value"=> $baseData['2009212284097537_1'] ?? 0,
+                            "value"=> round(($baseData['2009212284097537_1'] ?? 0) / 10, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "分离前压力",
-                            "value"=> $baseData['2009212284128257_1'] ?? 0,
+                            "value"=> round(($baseData['2009212284128257_1'] ?? 0) / 10, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "进气负压",
-                            "value"=> $baseData['2009212284148737_1'] ?? 0,
+                            "value"=> round(($baseData['2009212284148737_1'] ?? 0) / 100, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "冷却液温度",
-                            "value"=> $baseData['2009212284169217_1'] ?? 0,
+                            "value"=> ($baseData['2009212284169217_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009212284208129_1'] ?? 0,
+                            "value"=> ($baseData['2009212284208129_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "主机温度",
-                            "value"=> $baseData['2009212284191745_1'] ?? 0,
+                            "value"=> ($baseData['2009212284191745_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "储气罐压力",
-                            "value"=> $baseData['2009212285819905_1'] ?? 0,
+                            "value"=> ($baseData['2009212285819905_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009212284263425_1'] ?? 0,
+                            "value"=> ($baseData['2009212284263425_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009212284281857_1'] ?? 0,
+                            "value"=> ($baseData['2009212284281857_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加卸载状态",
@@ -802,46 +806,46 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"2#压风机",
-                "state"=> $baseData['2009212283776001_2'] ?? 0,
-                "text"=>($baseData['2009212283776001_2'] ?? 0) > 0 ? "启动" : "停止",
+                "state"=> ($baseData['2009212283776001_2'] ?? 0),
+                "text"=>($baseData['2009212283776001_2'] ?? 0) > 0 ? "运行" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "排气压力",
-                            "value"=> $baseData['2009212284378113_1'] ?? 0,
+                            "value"=> round(($baseData['2009212284378113_1'] ?? 0) / 100, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "分离前压力",
-                            "value"=> $baseData['2009212284390401_1'] ?? 0,
+                            "value"=> round(($baseData['2009212284390401_1'] ?? 0) / 100, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "进气负压",
-                            "value"=> $baseData['2009212284404737_1'] ?? 0,
+                            "value"=> round(($baseData['2009212284404737_1'] ?? 0) / 100, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "冷却液温度",
-                            "value"=> $baseData['2009212284419073_1'] ?? 0,
+                            "value"=> ($baseData['2009212284419073_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009212284460033_1'] ?? 0,
+                            "value"=> ($baseData['2009212284460033_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "主机温度",
-                            "value"=> $baseData['2009212284437505_1'] ?? 0,
+                            "value"=> ($baseData['2009212284437505_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "储气罐压力",
-                            "value"=> $baseData['2009212285838337_1'] ?? 0,
+                            "value"=> ($baseData['2009212285838337_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009212284525569_1'] ?? 0,
+                            "value"=> ($baseData['2009212284525569_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009212284546049_1'] ?? 0,
+                            "value"=> ($baseData['2009212284546049_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加卸载状态",
@@ -864,46 +868,46 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"3#压风机",
-                "state"=> $baseData['2009212283857921_2'] ?? 0,
-                "text"=>($baseData['2009212283857921_2'] ?? 0) > 0 ? "启动" : "停止",
+                "state"=> ($baseData['2009212283857921_2'] ?? 0),
+                "text"=>($baseData['2009212283857921_2'] ?? 0) > 0 ? "运行" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "排气压力",
-                            "value"=> $baseData['2009212284619777_1'] ?? 0,
+                            "value"=> round(($baseData['2009212284619777_1'] ?? 0) / 100, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "分离前压力",
-                            "value"=> $baseData['2009212284634113_1'] ?? 0,
+                            "value"=> round(($baseData['2009212284634113_1'] ?? 0) / 100, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "进气负压",
-                            "value"=> $baseData['2009212284404737_1'] ?? 0,
+                            "value"=> round(($baseData['2009212284404737_1'] ?? 0) / 100, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "冷却液温度",
-                            "value"=> $baseData['2009212284670977_1'] ?? 0,
+                            "value"=> ($baseData['2009212284670977_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009212284711937_1'] ?? 0,
+                            "value"=> ($baseData['2009212284711937_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "主机温度",
-                            "value"=> $baseData['2009212284693505_1'] ?? 0,
+                            "value"=> ($baseData['2009212284693505_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "储气罐压力",
-                            "value"=> $baseData['2009212285858817_1'] ?? 0,
+                            "value"=> ($baseData['2009212285858817_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009212284761089_1'] ?? 0,
+                            "value"=> ($baseData['2009212284761089_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009212284775425_1'] ?? 0,
+                            "value"=> ($baseData['2009212284775425_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加卸载状态",
@@ -926,46 +930,46 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"4#压风机",
-                "state"=> $baseData['2009212283954177_2'] ?? 0,
-                "text"=>($baseData['2009212283954177_2'] ?? 0) > 0 ? "启动" : "停止",
+                "state"=> ($baseData['2009212283954177_2'] ?? 0),
+                "text"=>($baseData['2009212283954177_2'] ?? 0) > 0 ? "运行" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "排气压力",
-                            "value"=> $baseData['2009212284894209_1'] ?? 0,
+                            "value"=> round(($baseData['2009212284894209_1'] ?? 0) / 100, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "分离前压力",
-                            "value"=> $baseData['2009212284906497_1'] ?? 0,
+                            "value"=> round(($baseData['2009212284906497_1'] ?? 0) / 100, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "进气负压",
-                            "value"=> $baseData['2009212284404737_1'] ?? 0,
+                            "value"=> round(($baseData['2009212284404737_1'] ?? 0) / 100, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "冷却液温度",
-                            "value"=> $baseData['2009212284929025_1'] ?? 0,
+                            "value"=> ($baseData['2009212284929025_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009212284949505_1'] ?? 0,
+                            "value"=> ($baseData['2009212284949505_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "主机温度",
-                            "value"=> $baseData['2009212284693505_1'] ?? 0,
+                            "value"=> ($baseData['2009212284693505_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "储气罐压力",
-                            "value"=> $baseData['2009212285875201_1'] ?? 0,
+                            "value"=> ($baseData['2009212285875201_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009212285017089_1'] ?? 0,
+                            "value"=> ($baseData['2009212285017089_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009212284998657_1'] ?? 0,
+                            "value"=> ($baseData['2009212284998657_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加卸载状态",
@@ -989,34 +993,34 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             // 5号压风机
             [
                 "label"=>"5#压风机",
-                "state"=> $baseData['2009212283954177_2'] ?? 0,
-                "text"=>($baseData['2009212283954177_2'] ?? 0) > 0 ? "启动" : "停止",
+                "state"=> ($baseData['2009212283954177_2'] ?? 0),
+                "text"=>($baseData['2009212283954177_2'] ?? 0) > 0 ? "运行" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "排气压力",
-                            "value"=> $baseData['2009212285090817_1'] ?? 0,
+                            "value"=> round(($baseData['2009212285090817_1'] ?? 0) / 100, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009212285105153_1'] ?? 0,
+                            "value"=> ($baseData['2009212285105153_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "轴承温度",
-                            "value"=> $baseData['2009212285123585_1'] ?? 0,
+                            "value"=> ($baseData['2009212285123585_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "储气罐压力",
-                            "value"=> $baseData['2009212285893633_1'] ?? 0,
+                            "value"=> ($baseData['2009212285893633_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009212285180929_1'] ?? 0,
+                            "value"=> ($baseData['2009212285142017_1'] ?? 0).($baseData['2009212285162497_1'] ?? 0).($baseData['2009212285180929_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009212285236225_1'] ?? 0,
+                            "value"=> ($baseData['2009212285209601_1'] ?? 0).($baseData['2009212285221889_1'] ?? 0).($baseData['2009212285236225_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "通讯状态",
@@ -1044,34 +1048,34 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             // 6号压风机
             [
                 "label"=>"6#压风机",
-                "state"=> $baseData['2009212285414401_1'] ?? 0,
-                "text"=>($baseData['2009212285414401_1'] ?? 0) > 0 ? "启动" : "停止",
+                "state"=> ($baseData['2009212285414401_1'] ?? 0),
+                "text"=>($baseData['2009212285414401_1'] ?? 0) > 0 ? "运行" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "排气压力",
-                            "value"=> $baseData['2009212285289473_1'] ?? 0,
+                            "value"=> round(($baseData['2009212285289473_1'] ?? 0) / 100, 2)."kg/cm³",
                         ],
                         [
                             "label"=> "排气温度",
-                            "value"=> $baseData['2009212285301761_1'] ?? 0,
+                            "value"=> ($baseData['2009212285301761_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "轴承温度",
-                            "value"=> $baseData['2009212285314049_1'] ?? 0,
+                            "value"=> ($baseData['2009212285314049_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "储气罐压力",
-                            "value"=> $baseData['2009212285910017_1'] ?? 0,
+                            "value"=> ($baseData['2009212285910017_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "运行时间",
-                            "value"=> $baseData['2009212285477889_1'] ?? 0,
+                            "value"=> ($baseData['2009212285449217_1'] ?? 0).($baseData['2009212285463553_1'] ?? 0).($baseData['2009212285477889_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "加载时间",
-                            "value"=> $baseData['2009212285543425_1'] ?? 0,
+                            "value"=> ($baseData['2009212285516801_1'] ?? 0).($baseData['2009212285529089_1'] ?? 0).($baseData['2009212285543425_1'] ?? 0)." H",
                         ],
                         [
                             "label"=> "通讯状态",
@@ -1096,35 +1100,35 @@ class ZQDcsAirAndNitrogenController  extends BaseController
 
                         [
                             "label"=> "运行频率",
-                            "value"=> $baseData['2009212285592577_1'] ?? 0,
+                            "value"=> ($baseData['2009212285592577_1'] ?? 0)." Hz",
                         ],
                         [
                             "label"=> "柜内温度",
-                            "value"=> $baseData['2009212285707265_1'] ?? 0,
+                            "value"=> ($baseData['2009212285707265_1'] ?? 0)." ℃",
                         ],
                         [
                             "label"=> "输入电压",
-                            "value"=> $baseData['2009212285604865_1'] ?? 0,
+                            "value"=> ($baseData['2009212285604865_1'] ?? 0)." V",
                         ],
                         [
                             "label"=> "输出电压",
-                            "value"=> $baseData['2009212285656065_1'] ?? 0,
+                            "value"=> ($baseData['2009212285656065_1'] ?? 0)." V",
                         ],
                         [
                             "label"=> "输入电流",
-                            "value"=> $baseData['2009212285619201_1'] ?? 0,
+                            "value"=> ($baseData['2009212285619201_1'] ?? 0)." A",
                         ],
                         [
                             "label"=> "输出电流",
-                            "value"=> $baseData['2009212285674497_1'] ?? 0,
+                            "value"=> ($baseData['2009212285674497_1'] ?? 0)." A",
                         ],
                         [
                             "label"=> "输入功率",
-                            "value"=> $baseData['2009212285633537_1'] ?? 0,
+                            "value"=> ($baseData['2009212285633537_1'] ?? 0)." W",
                         ],
                         [
                             "label"=> "输出功率",
-                            "value"=> $baseData['2009212285690881_1'] ?? 0,
+                            "value"=> ($baseData['2009212285690881_1'] ?? 0)." W",
                         ],
                         [
                             "label"=> "运行方式",
@@ -1148,34 +1152,34 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             // 制氮机
             [
                 "label"=>"1#制氮机",
-                "state"=> $baseData['2009218787570689_2'] ?? 0,
-                "text"=>($baseData['2009218787570689_2'] ?? 0) > 0 ? "启动" : "停止",
+                "state"=> ($baseData['2009218787570689_2'] ?? 0),
+                "text"=>($baseData['2009218787570689_2'] ?? 0) > 0 ? "运行" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "塔A压力",
-                            "value"=> $baseData['2009218787843073_1'] ?? 0,
+                            "value"=> ($baseData['2009218787843073_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "塔B压力",
-                            "value"=> $baseData['2009218787859457_1'] ?? 0,
+                            "value"=> ($baseData['2009218787859457_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "进口压力",
-                            "value"=> $baseData['2009218787826689_1'] ?? 0,
+                            "value"=> ($baseData['2009218787826689_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "出口压力",
-                            "value"=> $baseData['2009218787871745_1'] ?? 0,
+                            "value"=> ($baseData['2009218787871745_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "氮气浓度",
-                            "value"=> $baseData['2009218787808257_1'] ?? 0,
+                            "value"=> ($baseData['2009218787808257_1'] ?? 0)." %",
                         ],
                         [
                             "label"=> "制氮流量",
-                            "value"=> $baseData['2009218787783681_1'] ?? 0,
+                            "value"=> ($baseData['2009218787783681_1'] ?? 0)." m³/h",
                         ],
                         [
                             "label"=> "就地停止",
@@ -1190,34 +1194,34 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"2#制氮机",
-                "state"=> $baseData['2009218910032897_2'] ?? 0,
-                "text"=>($baseData['2009218910032897_2'] ?? 0) > 0 ? "启动" : "停止",
+                "state"=> ($baseData['2009218910032897_2'] ?? 0),
+                "text"=>($baseData['2009218910032897_2'] ?? 0) > 0 ? "运行" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "塔A压力",
-                            "value"=> $baseData['2009218787843073_1'] ?? 0,
+                            "value"=> ($baseData['2009218787843073_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "塔B压力",
-                            "value"=> $baseData['2009218910301185_1'] ?? 0,
+                            "value"=> ($baseData['2009218910301185_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "进口压力",
-                            "value"=> $baseData['2009218910266369_1'] ?? 0,
+                            "value"=> ($baseData['2009218910266369_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "出口压力",
-                            "value"=> $baseData['2009218910317569_1'] ?? 0,
+                            "value"=> ($baseData['2009218910317569_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "氮气浓度",
-                            "value"=> $baseData['2009218910245889_1'] ?? 0,
+                            "value"=> ($baseData['2009218910245889_1'] ?? 0)." %",
                         ],
                         [
                             "label"=> "制氮流量",
-                            "value"=> $baseData['2009218910231553_1'] ?? 0,
+                            "value"=> ($baseData['2009218910231553_1'] ?? 0)." m³/h",
                         ],
                         [
                             "label"=> "就地停止",
@@ -1232,34 +1236,34 @@ class ZQDcsAirAndNitrogenController  extends BaseController
             ],
             [
                 "label"=>"3#制氮机",
-                "state"=> $baseData['2009218930826241_2'] ?? 0,
-                "text"=>($baseData['2009218930826241_2'] ?? 0) > 0 ? "启动" : "停止",
+                "state"=> ($baseData['2009218930826241_2'] ?? 0),
+                "text"=>($baseData['2009218930826241_2'] ?? 0) > 0 ? "运行" : "停止",
                 "table"=>[
                     "thead"=>["参数名称", "数值"],
                     "tbody"=>[
                         [
                             "label"=> "塔A压力",
-                            "value"=> $baseData['2009218931053569_1'] ?? 0,
+                            "value"=> ($baseData['2009218931053569_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "塔B压力",
-                            "value"=> $baseData['2009218931067905_1'] ?? 0,
+                            "value"=> ($baseData['2009218931067905_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "进口压力",
-                            "value"=> $baseData['2009218931028993_1'] ?? 0,
+                            "value"=> ($baseData['2009218931028993_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "出口压力",
-                            "value"=> $baseData['2009218931082241_1'] ?? 0,
+                            "value"=> ($baseData['2009218931082241_1'] ?? 0)." Mpa",
                         ],
                         [
                             "label"=> "氮气浓度",
-                            "value"=> $baseData['2009218931010561_1'] ?? 0,
+                            "value"=> ($baseData['2009218931010561_1'] ?? 0)." %",
                         ],
                         [
                             "label"=> "制氮流量",
-                            "value"=> $baseData['2009218930994177_1'] ?? 0,
+                            "value"=> ($baseData['2009218930994177_1'] ?? 0)." m³/h",
                         ],
                         [
                             "label"=> "就地停止",

Modules/OpcData/Http/Controllers/Api/zaoquan/ZQDcsFanController.php

@@ -118,28 +118,32 @@ class ZQDcsFanController  extends BaseController
         $info = [
             "charData_1"=>[
                 "series"=>[
-                    "data"=>[
-                        [
-                            "name"=>"有效风",
-                            "value"=>round($windData['vaildWindRate'], 1)
-                        ],
-                        [
-                            "name"=>"无效风",
-                            "value"=>round(1-$windData['vaildWindRate'], 1)
+                    [
+                        "data"=>[
+                            [
+                                "name"=>"有效风",
+                                "value"=>round($windData['vaildWindRate'], 1)
+                            ],
+                            [
+                                "name"=>"无效风",
+                                "value"=>round(1-$windData['vaildWindRate'], 1)
+                            ]
                         ]
                     ]
                 ]
             ],
             "charData_2"=>[
                 "series"=>[
-                    "data"=>[
-                        [
-                            "name"=>"供风量",
-                            "value"=>$windData['needTotalQuantity']
-                        ],
-                        [
-                            "name"=>"需风量",
-                            "value"=>$windData['needQuantity']
+                    [
+                        "data"=>[
+                            [
+                                "name"=>"供风量",
+                                "value"=>$windData['needTotalQuantity']
+                            ],
+                            [
+                                "name"=>"需风量",
+                                "value"=>$windData['needQuantity']
+                            ]
                         ]
                     ]
                 ]